Modular rack system to organize filament boxes by sclarke27

sclarke27

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

14.6 h

7 plates

5.0(16)

Boost

181

225

719

Released

Description

Printable Rack system designed around the filament boxes from Bambu.

To add stability, parts can be bolted together horizontally using a m2*8 bolt and snapped together vertically with the Upright Snap part.

Cabinet doors have slots to insert magnets to help hold doors shut.

filament box

modular

filament rack

Comment & Rating (21)

@berndE

Worked well. A stable little rack. Not only for boxes, also for Spool covers, see https://makerworld.com/en/models/46702#profileId-48532. Thank you. For my higher Prusa-Boxes I added some mm, so that they would fit. Just in the printer, so no photo ;-)

The designer has replied

@sclarke27

Thanks for sharing that photo. Its cool to see it in action in someone else's setup. Glad it worked well for you.

@ABDELat

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed the first 2 racks. Works great, without any problems directly form the Bambu Handy App.

@Masestgeorge

Print Profile

0.2mm layer, 2 walls, 15% infill

Plate 1 so far is all I have used but all 4 times I printed the shelf it has come out smooth and they have connected very well.

The designer has replied

@sclarke27

Glad its printing out well for you. Plate 1 is really the only one that is required, everything else is optional. That said, the short top piece (plate 2) can help keep the top most shelf from flexing/sagging when loaded with a filament box. The side snaps on plate 7 also go a long way to adding stability to a stack, especially if you have a tall stack of shelves. Thanks for trying this out! Hope it works well for you.

@pwntastic

Boosted

Digging this, thanks!

@crockettstudios

You posted that it uses M2 bolts. However the holes actually fit M3. If you try to use M2 bolts, I think they'll be too small. But I happen to have M3s, and I think this is a great system. Thank you for designing it.

@user_86893870

Print Profile

0.2mm layer, 2 walls, 15% infill