You can 3D print and sell this model.

In product listing description make sure to include a link to this MakerWorld post.

Message me if you would like me to design anything (completely for free.)

Nescafe Pod Holder

Intro

This Nescafe Pod holder is for having easy access to your coffee. It is designed to be printable on a 180 cubed print volume. When I printed it the seem was at the front. In the future I think it should move the seem to the back or print in vase mode. 

Features:

• Holds 15 pods
• Easy to get pods out

Print settings

• Material: PETG
• Supports: paint on organic supports at the bottom
• Infill: 100%

What you will need:

• 1x 3D printed Nescafe pod holder
• 2x 4mm wide screws
• 2x wall plugs
• drill
• screw driver
• spirit level
• pencil

Assembly:

1. Align the Nescafe Pod Holder on the wall where you want it to be. 
2. Use the spirit level to make sure it is level.
3. Mark using a pencil the holes to be drilled.
4. Drill the holes, insert wall plugs and screw the Nescafe Pod Holder into the wall. (be careful not to break the plastic)