This is a remixed model of the "2019 Subaru Crosstrek_40 oz Water Bottle Holder" made by tomecar. The goal of this remix was to reduce overhang angles to a max of 45º and to smooth out the overall geometry and appearance.
I have not had an opportunity to test the compatibility on anything other than a 2019 Crosstrek. The other models listed use the same cup holder mat (92177AG170) leading me to believe that the cup holders they are paired with would have very similar if not identical dimensions and clearance.
Subaru Crosstrek 2.0L 5MT Premium | 2016, 2017 |
Subaru Crosstrek 2.0L CVT Premium | 2016, 2017 |
Subaru Crosstrek 2.0L HYBRID CVT Premium | 2016 |
Subaru STI 2.5L TURBO 6MT Base | 2015, 2016, 2017, 2018, 2019, 2020, 2021 |
Subaru STI 2.5L TURBO 6MT LIMITED | 2015, 2016, 2017, 2018, 2019, 2020, 2021 |
Subaru STI 2.5L TURBO 6MT Premium | 2018, 2019, 2020, 2021 |
Subaru STI 2.5L TURBO 6MT Sport SEDAN | 2012, 2013, 2014 |
Subaru STI 2.5L TURBO 6MT TYPE RA | 2018 |
Subaru STI 2.5L TURBO 6MT WAGON | 2008, 2009, 2010, 2012, 2013, 2014 |
Subaru WRX 2.0L 6MT Base | 2015, 2016, 2017, 2018, 2019, 2020, 2021 |
Subaru WRX 2.0L 6MT Limited | 2015, 2016, 2017, 2018, 2019, 2020, 2021 |
Subaru WRX 2.0L 6MT Premium | 2015, 2016, 2017, 2018, 2019, 2020, 2021 |
Subaru WRX 2.0L 6MT PREMIUM HK | 2017 |
Subaru WRX 2.0L CVT Base | 2015, 2016, 2019 |
Subaru WRX 2.0L CVT Limited | 2015, 2016, 2017, 2018, 2019, 2020 |
Subaru WRX 2.0L CVT Limited w/EyeSight | 2016, 2017 |
Subaru WRX 2.0L CVT LIMITED WITH LIP ES | 2018, 2019, 2020, 2021 |
Subaru WRX 2.0L CVT Premium | 2015, 2016, 2017, 2018 |
Subaru WRX 2.0L CVT PREMIUM WITH LIP ES | 2019, 2020, 2021 |
Subaru WRX 2.5L TURBO 6MT S209 | 2019 |
Printer:
X1-Carbon
Rafts:
No
Supports:
No
Resolution:
0.3mm Layer Height / 0.6mm Hardened Steel Nozzle
Infill:
25% Support Cubic
Filament:
Polymaker ASA (Scaled to 100.80% to compensate for ASA shrinkage)
Notes:
Printing this model took less than 2hr @0.30mm layer height. I recommend printing in heat resistant filaments. I personally chose to use ASA due to it's temperature tolerances and UV resistance. I believe PETG would also be sufficient.
I've included the .step file for this model which should hopefully make it easy to adjust any dimensions if needed. The unaltered dimensions of the model are as follows:
Upper half:
Lower half:
Model overall size: 100mm x 145mm