Rise and shine Mr. Freeman… Rise and shine.
This light box will require LED strip lights or another source of illumination. The illuminated picture almost makes the gold brim and lambda symbol appear white, however in person it is very gold.
AMS used in 3 slots, this was printed in Sunlu PLA+ Black, Orange and Gold. Recommended textured PEI Plate, aux and chamber fan off, flow rate set to default unless you have separation issues, then bump it to 1.02. Set wall generation to arachne. The print profile should have all of this set for you minus the chamber fan. All parts should be split into parts and set colors by part, not with the “paint” tool, otherwise you can run into black blotches.
But wait! The box doesn't have a hole for a cord!
That's intentional. If you're running this on batteries, you don't need it. If you want the cord in the back or on the side, you'll have to add it.
But how?
Click on the light box base. Right click and click “Add negative part.” Scale your hole to the size you want, then “move” it using the move tool so it goes through the box. Slice the box and your hole has been added.