Summary

when i got my first resin printer i realized it was pretty important to have the printer its self level so the resin in the vat stays level with the fep. at first i just used cardboard under the feet on the voxelab proxima then someone offered me a elegoo mars for $100 an i got it. when setting it up i noticed its feet were made to be adjustable so u could level the printer with its feet. it might be possible to do something similar to the voxelab proxima but this was just alot faster an easier for me. i have alot of scrape wood from past jobs an i always use floating floor hardwood flooring to put flooring in enclosures an tops to cover them so i designed this to fit the thickness of the floating floor. its just under 50mm so anything around 50mm should be able to fit my brackets, if not u can scale it in one direction to increase the gap or just let me know an i can make the changes an update the files with different sizes. i may do that anyways with more common size. but this will let u put a wrench on the top of the foot an turn it to level the platform so the printer is always sitting level. hope this helps someone as much as it did me.

Print Settings

Printer Brand:

Creality

                                            Printer:                      
Ender 3

Rafts:

                                            Supports:                      
No

Resolution:

200

                                            Infill:                      
15

Filament:

Sunlu PLA

                Black                    
                        Notes:                     
ive only printed an used v1, v2 was my second go at just trying to clean them up alittle. i have the bigger feet on mine an dont know how well the smaller ones will do but they still should do the job, just smaller area for the wrench or pliers to grab the foot to turn it but should still work the same as the other. the v2 bracket is only difference from v1 is i put a cover where the bolt comes through on v2 so the bolt is never seen while on v1 it just comes through the top. im using a 25 to 30mm long m3 counter sunk screw, thats something else i should probably do is make different feet for the screws, this one may still work with button head bolts also ive just not tested it myself. let me know if anyone needs these changes made an i'll update them as soon as i see ur comments.