This is a Hueforge for a 200x220 portait oriented Mario character breaking through a brick wall. This brings back so much nostalgia from playing Mario on the SNES

For this profile, you can use ams or color swap manually. It does use five colors, but two of those colors are the same silver, just on different layers, so loading the ams is just 4 colors in one ams

Start with black (I used IIIDMAX Black PLA)

At layer 9 swamp to silver (I used Flashforge Silver PLA)

At layer 10 swap to red (I used Sunlu Red PLA)

At layer 12 swap to silver (I used Flashforge Silver PLA)

At layer 15 swap to white for the remainder of the print (I used Sunlu White PLA)

For print settings you will want

0.08 Fine layer height

First layer at 0.16 layer height

100% infill