Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA Black Transmission Distance: 0.3
    PLA Gray Transmission Distance: 2.5
    PLA Red Transmission Distance: 1.5
    PLA White Transmission Distance: 6

Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to Gray
    At layer #10 (0.88mm) swap to Red
    At layer #15 (1.28mm) swap to White for the rest.

Thanks you so much everyone =)