Mewtwo Multipart by alessandro.zamagna2

alessandro.zamagna2

Toys & Games>Characters

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.16mm layer, 2 walls, 7% infill

Designer

20.2 h

10 plates

4.6(8)

Fixed 3d model and color : 0.16mm layer, 2 walls, 7% infill

27.4 h

11 plates

4.6(5)

Shiny Mewtwo; 0.16mm layer, 2 walls, 7% infill

21.6 h

10 plates

4.3(4)

Boost

403

580

883

146

Released

Description

Here is a multipart Mewtwo, just like Charizard you can scale as much as you want and print every part with the right color. I'll upload my print profile, which is scaled 800% from the original model, the result is an almost 40cm Mewtwo. I just want to mention a couple of things:

1- I printed the tail plate at 50% speed, at normal speed the supports fell off;

2- I didn't want a big round base cause I don't like it. So I added the little stand on the right foot. Unfortunately, the moment I glued the tail the model couldn't stand anymore. As you can see in the picture I then printed a sort of “heel” and glued it to the stand, it is not ideal but it works. There is also another file “LegRight2” which has a modified version of the stand but I don't have time now to print it and try it, so I leave that to any of you who want to try it out and please let me know if you do!

let me know what you think guys, enjoy!

Comment & Rating (49)

@HJ_3D_

Boosted

Print Profile

Shiny Mewtwo; 0.16mm layer, 2 walls, 7% infill

🤩

@NightRaven

Boosted

How did you print the right eye? It comes out empty to me.

@HJ_3D_

Boosted

Replying to @NightRaven :

Sorry i changed some setting when i printed this part but i don't remember

@NightRaven

Boosted

Replying to @HJ_3D_ :

Thanks for the reply. Dang that is unfortunate. That is the only thing I am missing.

@daclap

why would the left eye not print the white? other then that it's a awsome print.

The designer has replied

@alessandro.zama

I don't know, I'll look into that!

@8Andy5

Replying to @alessandro.zama :

Hello, Is there a solution for this? I have the same problem. Thank you very much.

@gizzua

Replying to @8Andy5 :

Hello, I have the same problem!!!!

@saicdr

cool! small:38cm big:60cm

The designer has replied

@alessandro.zama

great job!!

@BobbyT3D

LOOKS GREAT!! DID YOU USE SUPPORTS?

@user_745906129

bonjour merci beaucoup pour ce fichier et encore bravo ! voici ma création

@user_2864029826

Print Profile

Shiny Mewtwo; 0.16mm layer, 2 walls, 7% infill

sehr cool geworden Dankeschön

@Codyinbody3

This is the same piece sliced with no supports so basically it's completely missing 10 layers. This is your print profile I downloaded and I only scaled it up a tad. Everything else is the same.

@Codyinbody3

Ya bro IDK what's going on but you can scale this up at all. Even a small amount. Never had that happen before with any model. I gotta scrap this now. I'm glad I caught it before I had 5 Bambu's printing all night. That would've wasted a lot of filament. Please edit this model and put in the info not to scale it up at all or the upper body won't slice right. I already had 3 plates printing before I sliced that one and I'm glad I did. It's the only one that wouldn't scale up. If someone doesn't see that, they're going to waste a lot of time and filament

@Codyinbody3

Can you explain to me why the upper body when sliced, splits itself into two pieces supported by supports? That'll never print like that in a million years. Why not just make it two separate pieces to begin with?

@Codyinbody3

There's 10 layers missing before it starts again

@Badakgil

Print Profile

0.16mm layer, 2 walls, 7% infill

good

@user_4238218817

How do I get the eyes to be multiple colors when printing?

@user_4238218817

Also the only thing I havent added yet is the left arm (and eyes) but he still wants to tumble backwards with the 2.0 leg. :(

(Edited)

@Codyinbody3

I just colored mine in Bambu Studio. Didn't take a super long time but did take around 5-10min. Totally worth it though! I may share my print profile with them colored after mines finished printing.