This is a prototype for now in testing stages before turning it into a tracer unit. There is a ccw thread file and cw file.

Settings I used:

8-10% gyroid or triangular infill

2 walls

.2mm layer height

for people testing suggest probably beefing up the infill to 15-20% and maybe 3 walls more if using reg play and depending on how abusive you are lol. I use strictly Pla + and tend to not have to go crazy on infill or walls as its much stronger.

Update:

1 - Added hollow 2 piece model for foam insert and baffles to come

2 - Added Multiple model variations! Make sure to pick the right base CW (clockwise threads) CCW (counter clock wise threads) all threads are 14x1mm which seams to be the standard for rifles.

3- V2 offers an outer shell with holes through it or no holes. Offers a 2 piece design allowing for foam inserts, no inserts or a press fit baffled insert.

4- V3 offers a solid outer shell with 3 pieces for easier printing with less supports and adds baffles. Baffles are also threaded for a real sturdy fit.