Features:
- Place in the back for magsafe metal ring (tested with Baseus)
![](https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-06-06_8a7d8f2d612b3.png?image_process=format,webp)
- Case is thicker in the back than the camera bump, so it sits flat on the desk
- Features cutouts for the type-C port, buttons and top microphone, so it should be relatively easy to install
Recommended printing settings:
- Set high count of top/bottom layers to make back solid
- Turn off supports
- Ideally print ‘primary’ part with something little bit flexible with strong layer adhesion to avoid breaking (eg. PLA-CF, PETG)
Slicing instructions:
On multicolour capable printers:
For 3MF:
- Add 'primary' to slicer
- Click add part → load 'secondary'
![](https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_l4wy9jd98cow.png?image_process=format,webp)
- Assign colours for multicolour
For STEP:
- Add model to slicer
- Split → to parts
![](https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-06-06_a5a3937024c9e.png?image_process=format,webp)
- Assign colours for multicolour
On other printers:
Watch beforehand, goes in detail about whole process:
https://youtu.be/m_SXRGGoTQo
For 3MF:
- Add 'primary' to slicer
- Click add part → load ‘secondary’
![](https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_bmttuheh7l6n.png?image_process=format,webp)
- Split → to objects
![](https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_xjfmmjo2zqh3.png?image_process=format,webp)
- Hide primary
![](https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_4hdch9tzcqu7.png?image_process=format,webp)
- Slice, print, remove skirt (either in slicer beforehand or manually afterwards)
- Hide secondary (remember to turn off supports)
![](https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_buk30qnudio3.png?image_process=format,webp)
- Slice and print
For STEP:
- Add model to slicer
- Split → to objects
![](https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_xjfmmjo2zqh3.png?image_process=format,webp)
- Hide primary
![](https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_qdp0vsrhxkbk.png?image_process=format,webp)
- Print, remove skirt (either in slicer or manually)
- Hide secondary (remember to turn off supports)
![](https://makerworld.bblmw.com/makerworld/model/DSM00000000411412/design/2024-04-03_c9wyuvee48wk.png?image_process=format,webp)
- Slice and print