Print Profile(1)
Description
Hueforge Monster Dragon
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Ash Gray
At layer #3 (0.32mm) swap to Black
At layer #6 (0.56mm) swap to Red
At layer #8 (0.72mm) swap to Orange
At layer #9 (0.8mm) swap to Yellow
At layer #10 (0.88mm) swap to Gray
At layer #12 (1.04mm) swap to White for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
