Innere, untere Türablage für Eingangstüre Wohnwagen FENDT Platin Baujahr 2004 /
Inner, lower door shelf for entrance door caravan FENDT Platin built in 2004
Für FENDT Wohnwagen der Baureihe 2001-2004 Innenseite Eingangstüre.
ACHTUNG! Ich habe dies nach den Maßen meiner Türe nachkonstruiert. Ob es bei anderen auch passt, kann ich nicht garantieren.
Daher am besten die beigefügte CAD-Zeichnung mit den Maßangaben verwenden und zuvor nachmessen.
Das Original Ablagefach ist an die Türe festklebt. Daher mit Heißluftfön zuvor den Kleber weich machen und dann vorsichtig abziehen. Danach die Stellen säubern und das neue Ablagefach mit einer Heißklebepistole wieder ankleben.
Ich empfehle, das Ablagefach mit PETG und 4 Wandlinien sowie min. 50% Füllung zu drucken! Kein PLA/PLA+!! Auch kein ASA, da es sonst brechen könnte, wenn einmal versehentlich daran gezogen wird.
←-------------------------ENGLISCH-------------------→
For FENDT caravans from the 2001-2004 series, inside entrance door.
DANGER! I reconstructed this based on the dimensions of my door. I can't guarantee whether it will work for others.
It is therefore best to use the enclosed CAD drawing with the dimensions and measure beforehand.
The original storage compartment is glued to the door. Therefore, first soften the adhesive with a hot air blower and then carefully remove it. Then clean the areas and glue the new storage compartment back on with a hot glue gun.
I recommend printing the storage compartment with PETG and 4 wall lines and at least 50% infill! No PLA/PLA+!! Also no ASA, otherwise it could break if accidentally pulled.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.