Cute Articulated Otter by John

John

Miniatures>Animals

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

4.5(21)

More Accurate 0.08mm layer, 2 walls, 15% infill

Designer

4.3 h

1 plate

4.3(19)

Flexi Otter, no support, 0.18mm layer, 2 walls, 10% infill

3.3 h

1 plate

4.9(7)

Color !0.2mm nozzle!, 0.1mm layer, 4 walls, 10% infill

10.4 h

1 plate

4.0(2)

Open in Bambu Studio

Boost

311

448

596

447

Released

Description

A cute articulated otter that is very detailed

Check out my other models if you like this one

Comment & Rating (60)

@Danger99

Why does this keep happening? I've slowed the print down, increased bed temp some, cleaned the plate, calibrated multiple times, cleaned the nozzle yet it fails on the first few layers 100% of the time. Attempted to print 5 times now and it just will not work. Bambu A1 Mini.

The designer has replied

@Danger99

Using the More Accurate 0.08mm layer version

@3422378323

Thats weird. I haven't had many problems with my printer which is the same one as yours. I would adjust size settings or other settings, or just use the print profile that I have made if you haven't already. I would like to hear if your still having problems after trying those things.

@Danger99

Replying to @3422378323 :

Thanks for the quick reply. I want to say first, I'm not upset just a newbie trying to figure things out. The first 2 times I tried the print I used your defaults then adjusted from there. After posting I tried printing the 0.2mm layer 2 wall 15% IF version and it completed. There were a few weird spots in the first neck section and the last tail section but, all in all it worked! lol I'm printing something else atm but I think I'm going to try adding a brim and see if it helps.

@Kittytaco

Boosted

Had issues with the print failing with smaller sizes, so I increased the size and haven't had any printing issues since. They are an adorable design!

@LauraCampy

Boosted

I added freckles to the otter and I can't even tell you how cute this thing is, the photos don't even do it justice. I've printed a lot of articulated critters and this one was my daughter's favorite because of how articulated he is! My customers LOVE him!

@JustinLauck

Boosted

Print Profile

More Accurate 0.08mm layer, 2 walls, 15% infill

awesome. my sons first print.

@SIR_PRINTSALOT

Print Profile

Color !0.2mm nozzle!, 0.1mm layer, 4 walls, 10% infill

Adorable!!

@user_2055699214

Print Profile

More Accurate 0.08mm layer, 2 walls, 15% infill

I printed 2 at once because if my wife gets something my son does too. One came with a deformity just behind the back of the head (i think it was my fault based on orientation), otherwise perfect. I printed this in Sunlu Blue. My son is 3 so he doesn't care about the deformity. It was printed at 220 filament and 55 bed.

@user_2269325161

Boosted

This model is such a hit with the kids. It's ferret like slinky movement in your hand is amazing. The final segment of the tail is consistently fused. Some if the other segments need a tiny bit of TLC to get them mobile. But I only know this as my kids have printed almost 20 now. I've only had a failed print when trying to use a matte pla, but that is at least partially user error. 10/10 will print again... and again.

The designer has replied

@3422378323

Thanks so much! There was been consistently errors with the prints