abs12

0.2mm layer, 2 walls, 15% infill, Ironing on

This is how I print my design, two plates (yellow and blue). Enabled ironing to get a nice finish.

<ul><li>0.2mm layer</li><li>2 walls</li><li>15% infill</li><li>no support</li><li>Bambu PLA Matte</li><li>Textured PEI Plate</li></ul>

Added pause at 29 mm to change yellow filament to blue.

You need to print this stand as two separte parts. Use some glue to fix them together.