Mein zweites Modell hier, habe es mit KI generiert und dann mit Hueforge bearbeitet.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Elegoo Grau Transmission Distance: 5.6
PLA RedLine Stein dunkel Transmission Distance: 5.6
PLA Recyclefabrik kluge Maus (hell grau) Transmission Distance: 8.8

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Grau
At layer #15 (1.28mm) swap to Stone dark
At layer #23 (1.92mm) swap to light gray for the rest