Leaning Tower of Pisa - Italy
Leaning Tower of Pisa - Italy
Print Profile(2)
Description
🇮🇹 Benvenuti in Italia!
Welcome to Italy!
One of the world's most famous landmarks joins MiniWorld3D's Wanderlust Collection , the bell tower or campanile of the cathedral of Pisa, an Italian city. People from all over the world visit it and take pictures holding or pushing it.
It started leaning due to poor foundation work since construction began in 1173, it took almost 200 years to reach completion at 56m tall. Ever since, there have been efforts to counter the tilt to prevent this beautiful romanesque building from collapsing, so the tilt angle has been dangerously higher in the past, but controlled at 4 degrees nowadays (from Wikipedia).
We modeled this with considerations for miniature printing, so it is easy to print and has great details when printed even with regular nozzles and standard setups.
It comes in two parts,:
- Base
- Tower, so that you can print it with perfectly horizontal layer lines and then assemble onto the tilted base.
This model was created in 2014 by MiniWorld3D founder & lead 3D artist Dany Sánchez.
MiniWorld3D is happy to bring this model to life as a homage to all the people of Italy. This model was created from scratch by hand and brain in parametric software to ensure printability, using photographs and blueprints to create a beautiful and stylized version of your favorite landmarks. Please give credit, it's all about spreading culture!
If you like what we do, consider joining our Printables.com Club, or our Patreon!
printables.com/@MiniWorld3D
patreon.com/MiniWorld3D
Find all our profiles, YouTube channel & social media on:
Join our 40K followers on IG!
MiniWorld3D is creating the best library of 3D printable models of famous buildings of the world since 2014.
More than 60 authors have contributed. Did you make a model we don't have? You can contribute too!
Photo credits: main print photo by @churnwalker21 , others by @sirio3d, @troyslatton & Dany Sánchez.
-----------
Printing Tips
Suggested parameters:
For better details, print slow, such as 20mm/s for outer perimeters.
Fine-tune retraction to avoid stringing.
Perimeters: 2
Top layers: 3
Infill: as low as 5% for miniatures, 12% if scaled larger.
No supports needed, this has been optimized to eliminate all overhangs.
Brim or raft not needed.
Comment & Rating (4)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
