Toilet paper holder for children. I generated this model starting from a SVG file. Everything is designed to be assembled without glue. The two minions are joined to the backplate, and the levers to hold the paper roll are attached to the two minios by clips. I was specting to have some troubles when printing the clips as they are small, but everything run perfect, dont be afraid about that.

The only thing you may need apart from PLA is a piece of steel wire to join the upper shel. If you dont have this, you can easily modify the desing making the holes a little big bigger and use a piece of filament instead the wire. To keep the wire in place I made two small covers, they fit quite tight but they do (I prefer it perfectly embossed to avoid potential disassemblies, as I used no glue).

I made the design without holes for screws, because I have used double sided tape (enough as the weight is quite low) to attach the holder to the tile. I will move the holder as per the needs of the growing children and I do not want a dozen of holes in the wall.

I added also two small ribs to keep the upper shell in place, to avoid having it resting over the roll.

Tyhe roll can be easily inserted/extracted moving it up and down.

All the parts that need support have it added in the print profile. The upper shell has also brim to improve the adhesion to the bed. The two minios are painted to have blue as color base and yellow parts. Support material is set to yellow, as i wanted this to avoid color contamination from the support in the two flanges to attach them to the backplate and in the inner supports for the levers.

I have printed all the model with matte and standard PLA from Bambu Lab with no issues. The current color configuration is prepared for one AMS, if you have more you could use grey for the glasses, blue and green for the eyes…