HueForge Butterfly with a splash of colors.

First attempt at creating AI image and adapting for HueForge, used as a gift and thought I'd share it here as well.
NOTE: Model is 210x210mm in size, and 3.5mm thick (to try and make it more “tactile”) - hence the long time to print.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Ivory White Transmission Distance: 4
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Basic Magenta Transmission Distance: 3.5
PLA BambuLab Matte Dark Blue Transmission Distance: 1

Swap Instructions:
Start with Ivory White
At layer #9 (0.8mm) swap to Mandarin Orange
At layer #22 (1.84mm) swap to Magenta
At layer #33 (2.72mm) swap to Dark Blue for the rest.