This is 14 gram fast printed minimalist Beagle cam mount which will give you super good angle for your bed.
You can of course add diffrent parts to make arm longer, but I consider it useless, unless you want to fiddle with camera angle.
Feel free to edit any file to make parts longer or shorter.

It uses
2x 20mm m3 bolts (thread lenght without scrw head)
2x 10mm m3 bolts
2-[4] m3 nuts
2x drop in m3 nut for v profile, use metal ones, or print them and combine with m3 nuts.

Note- holes are tight fit to make it more sturdy, so you will need to screw threads trough plastic - it will take more time to assemble.

This project will save you space on desk, and you can ditch this ugly foot of beagle camera.
You will make me happy with a comment or a photo of your print.
Cheers.


Print only first 2 files, others are optional.
0.2mm layer
walls, top and bottom layers: 3
I've used 15% gyroid, but 20% lines is okay too.
If you trust your bed adhesion you can print it without brims, I used small ones with 0,1mm gap brim-to-model.

No supports required, print it like it is in the model - flat.