I always wanted a solution for putting my hue dimmer switches over the light switches in the room to prevent lights from getting turned off. I designed this to have separate parts for the base and top plate. This allows just the base to be changed for different types of light switches or the top plate to be changed for different generations of hue dimmer switches.

The base is split into two pieces to be more printer friendly. The bottom spacer snaps into the base using snap fits from bambu slicer

This base is then mounted to the light switch

Magnets are then added to the top plate. Gen 1 uses 16mm x 2mm neodymium magnets. Gen 2 uses 16mm x 2mm neodymium magnets. I used a dab of super glue to keep these in place. Make sure to check that the magnets are in the correct orientation.

The top plate is then press fit onto the baseplate, allowing the dimmer switch to be easily mounted to the wall.