[Remix] reusable zip tie
Remixed by
Copyright Claim
[Remix] reusable zip tie
Remixed by
Boost
311
480
39
Print Profile(4)
All sizes 0.2mm layer, 2 walls, 15% infill
Designer
2.3 h
3 plates
Medium TPU 20 Minutes 0.2mm layer, 2 walls, 15% infill
Designer
19 min
1 plate
Large Size TPU 20 Minutes 0.2mm layer, 2 walls, 15% infill
Designer
21 min
1 plate
A1 Mini SM 0.2mm layer, 2 walls, 15% infill
21 min
1 plate
Open in Bambu Studio
Boost
311
480
39
9
450
279
Released
Description
This is a remix of a model by @EmaKralova
(https://makerworld.com/en/models/224716#profileId-242637)
I added different size options.
The 'small' version is the original by @EmaKralova
Lengths:
Small: ca 140mm
Medium: ca 220mm
Large: ca 290mm
Advice:
The 'large' zip tie only fits on the 265mm² build plates diagonally.
I recommend printing with TPU
If you just want the ‘small’ version, please check out the original design (https://makerworld.com/en/models/224716#profileId-242637)
Comment & Rating (39)
All
Print Profile
All sizes 0.2mm layer, 2 walls, 15% infill
For large diameters it works well with pla too.
(Edited)
1
Reply
Print Profile
A1 Mini SM 0.2mm layer, 2 walls, 15% infill
thanks!
0
Reply
Print Profile
All sizes 0.2mm layer, 2 walls, 15% infill
Polymaker Polyflex on smooth plate
0
Reply
Boosted
Print Profile
All sizes 0.2mm layer, 2 walls, 15% infill
The models are really well made. As good as the commercial ones I have used. Printed in BL TPU 95A HF. Thanks!
0
Reply
Print Profile
Medium TPU 20 Minutes 0.2mm layer, 2 walls, 15% infill
first print with tpu.
0
Reply
Print Profile
A1 Mini SM 0.2mm layer, 2 walls, 15% infill
Very usefull design.
Thank you.
Need to dry TPU before printing.
Bambu TPU 95A HF, by A1 mini.
0
Reply
Print Profile
All sizes 0.2mm layer, 2 walls, 15% infill
tested with PLA. Prints great but with PLA it is somewhat brittle. Would suggest using PETG if possible
The designer has replied
1
Reply
For me it works the best with TPU as it’s the most flexible.
please let me know how well it works with PETG. Would like to know someone else’s results ;)
0
Reply
Boosted
Works perfect! Nice ecological alternative.
1
Reply
Prints well but using PLA filament makes the tie brittle and breaks if you aren't careful with it
0
Reply
Author says to use TPU
0
Reply
Print Profile
All sizes 0.2mm layer, 2 walls, 15% infill
Nice zip tie, but the small stop breaks easily on the height. Probably because i printed it in PETG tho.
0
Reply
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld