A heat insert press helps place them more precisely and cleanly.
You can use the linear guide or the 2020 profile of the size you think is convenient or have at home, you just have to be careful that the profile has to be, at least, 55mm longer than the guide
Bill of materials:
Linear rail | 1 | 230 length in my case |
Mgn12C block | 1 | |
M3x8 screws | 13 | 15 if you want to put 2 springs |
Washer | 2 | 4 if you want to put 2 springs |
M3 t-nut | 7 | |
Spring | 1 | or 2 if you want put 2. 7,14mm diameter and 50,8mm in my case |
2020 profile | 1 | 330mm lenght in my case |
Heat insert | 2 | 4 if you want to put 2 springs |
Zip tie | 1 | |
M10 washer | 1 |
Optional for cable winder:
M3x8 screws | 2 |
M3 T-nuts | 2 |