ATTENTION read all the information in detail before starting the project !!

Corner lamp to create ambient light. This lamp is inspired by the model (Phipils Gradient Signe floor lamp), but at a price approximately 10 times lower, these lamps do not have dynamic effects like the Philips ones (each LED has a different color) but allow you to create a very different environment in a stay at a very affordable price.
They are perfect to put at the ends of a couch to create an atmosphere together with the LEDs on the television.

The total cost for 2 lamps is approximately 50€ (20€ 5meters led strips + 20€ 2xled strip mounting profiles + 6€ 3dparts) Approximate price depends on the leds and filament chosen

IMPORTANT!!!! Before printing the base, check with the adjustment piece that the profile fits without problem in case it is necessary to scale the piece a little in x and y axis

It consists of 3 parts:

• Body: Here the led strip profile is anchored
• Bottom part: To cover the cables
• Fit part

The total height of the lamp once assembled is 1.15 m

Necessary material:

• Profile to mount led strips. I have used 1m long profiles to mount leds up to 20mm wide. This is the model I have:
  https://www.amazon.es/LEDKIA-LIGHTING-Aluminio-Continua-Esquinas/dp/B08MQBDWTL/ref=sr_1_3?__mk_es_ES=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1PD07CNGZZXS6&keywords=perfil%2Baluminio%2Bled%2B30x30&qid=1679308737&sprefix=perfil%2Baluminio%2Ble%2B30x30%2Caps%2C77&sr=8-3&th=1
• LED strips. Here you can choose any but it is best to choose models compatible with alexa and smartflife. In this way, you can create different environments and activate them through voice commands. It is also interesting to choose LEDs that have the cold and warm white chip independent from the RGB, in this way they are used to illuminate the room like a traditional lamp
  This is the model I have:
  https://www.amazon.es/gp/product/B07PXJH1FZ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
• 10x M3x8mm screws to anchor the profile and the bottom cover

If you make it, let me know in the comments and in the makes section! ;)

Once the lamp is assembled, it is interesting to add some weight in some way to the base (some sand, for example in a bag, some iron sheet, etc.) so that it wobbles less due to the low weight of the base, The lamp is completely stable, but it is true that if it is forced from the upper part it easily overturns. I have mine without anything and they fit me well I have not had any problems