This is the modified enhanced, much THICKER version of Loki.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.8
PLA BambuLab Basic Green Transmission Distance: 8
PLA BambuLab Basic Yellow Transmission Distance: 4
PLA eSUN White Transmission Distance: 1.6
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Green
At layer #15 (1.28mm) swap to Yellow
At layer #23 (1.92mm) swap to White for the rest.
All the designs i upload, i have to print first, and that's a lot of filament 😬 And filament isn't free..
So, if you like my work you could
buy me a coffee if you like. 😉
https://www.buymeacoffee.com/a.vdh_83
Or a donation via Paypal is also much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL