San Antonio Spurs Logo (02-17) - Hueforge
Printing instructions:
No MMU or AMS required, but AMS makes it much easier.
Print at 100% infill
Layer height: 0.08
First Layer Height 0.16
Filaments Used:
- PLA BambuLab Basic Black Transmission Distance: 0.6
- PLA+ eSun Silver Transmission Distance: 3
- PLA Sunlu White Transmission Distance: 4
Swap Instructions:
- Start with Black
- At layer #13 (1.12mm) swap to Silver
- At layer #17 (1.44mm) swap to White for the rest.
Go Spurs Go!