Here i have my Voron 0.1 Shelf which uses a Ikea Shelf, i used some Supports under just to give it extra strength.

Requires 4 Heat inserts (standard voron ones)

4x 25mm screws

2x Wood screws for the back to hole the plate on.

I have included the colour letters which you can print in your choice of colour, I used the press fitted letters, if your tolerances are not great, i would recommend the glue in ones, just print 1 of each and see which fits better on your print.

Print with 20% infil 0.2 Layer height. Easy print and to install.