Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyLite Dark Blue Transmission Distance: 0.4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyTerra Lava Red Transmission Distance: 1
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Dark Blue
At layer #8 (0.72mm) swap to Jade White
At layer #12 (1.04mm) swap to Black
At layer #15 (1.28mm) swap to Lava Red
At layer #17 (1.44mm) swap to Jade White for the rest.