HEX shelves wall mounting by w00lfy

w00lfy

Hobby & DIY>Other Hobby & DIY

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.24mm layer, 2 walls, 50% lightning infill

Designer

5.3 h

2 plates

3.6(5)

Boost

100

Released

Description

Wall mounting HEX shelves including a stencil to mark for screwholes and a spacer to mount them in equal distances to each other.

My default profile uses lightning infill which makes them super light.

The shelves mount to the wall with two 4mm taper head screws (non visible once mounted)

Comment & Rating (7)

@maureen.nemetsk

Printed in PLA-CF. Love the look! Thank you for the great model!

@Chevytrucks5

I did a lot of searching for a wall mount that will work for both styles of the AMS and that will allow enough space from the wall the lid will stay open. Thank you for this! I plan on getting another AMS soon would it be possible to make one of the brackets hold two?

@sadleviissad

Print Profile

0.24mm layer, 2 walls, 50% lightning infill

very flimsy and broke immediately while trying to rove from the buold plate

@magmapumpkin

Print Profile

0.24mm layer, 2 walls, 50% lightning infill

Quick print for the size. Just be aware since there isn't any infill in the middle of the print, the walls flex and can warp a little.

@Adherant

Print Profile

0.24mm layer, 2 walls, 50% lightning infill

cool idea

@alexgp0906

Print Profile

0.24mm layer, 2 walls, 50% lightning infill

the lighting infill profile are super squishy, I broke 2 pieces and wasted a lot of material. putting around 10% infill (adaptive cubic) makes them a bit heavier but much sturdier.

(Edited)