Sheep Toilet Paper Holder ( Support Free ) by 3DJPDESIGNS

3DJPDESIGNS

Miniatures>Animals

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

Seperated Pieces 0.2mm layer, 2 walls, 5% infill

Designer

11.2 h

4 plates

4.8(5)

All in 1 Plate 0.2mm layer, 2 walls, 5% infill

Designer

14.2 h

1 plate

Body for tube 36 to40mm France 0.2mm layer 2 walls 5% infill

8.6 h

4 plates

Open in Bambu Studio

Boost

Released

Description

Some of my Patreons Suggested to make this Cute Toilet Paper Holder
Hope you guys like it <3

Make sure to Head over to my Patreon for more Cute STLs
https://www.patreon.com/3DJPDESIGNS

Files Included Are :
Head
Legs
Neck
Body

Support Free Print
With multiple possibilities

DO NOT KNOW HOW TO DRAW THE EYES ?
Discord Tutorial Over at :
https://discord.gg/JtgAZXcngX

FOR PERSONAL USE ONLY
IF INTERSTED IN SELLING THEM
CONSIDERING SUBSCRIBING TO MY PATREON

https://www.patreon.com/3DJPDESIGNS

Being a Patreon will get these files for free every month ^-^

Consider following me on Instagram for more updates !
https://www.instagram.com/3djpdesigns/

Created to bring some fantasy into your work place !

Note: This design has been created as ORIGINAL ART

Comment & Rating (19)

@benjibenji45

Boosted

I'm very satisfied! I had to start over with the body because it doesn't match the diameter of the paper in France. (I share my modification Diameter 35 mm for 36 to 40mm => ok) Otherwise I'm a huge fan! ^^ thank you ;-)

The designer has replied

@3DJPDESIGNS

came out amazing either way 😍😍😍 thanks for sharing ♥️♥️

@benjibenji45

Boosted

Replying to @3DJPDESIGNS :

My daughter is a fan too 🤩

@3DJPDESIGNS

Replying to @benjibenji45 :

awhh Im glad <3 !!

@benjibenji45

Boosted

Print Profile

Seperated Pieces 0.2mm layer, 2 walls, 5% infill

good , with A1 two color . more to come

(Edited)

The designer has replied

@3DJPDESIGNS

ooh coming out amazing!! Make sure to show us more :O!!

(Edited)

@OPA10

Print Profile

Seperated Pieces 0.2mm layer, 2 walls, 5% infill

good but long print

The designer has replied

@3DJPDESIGNS

came out AMAZING!!!!

@strolsie

Boosted

Print Profile

Seperated Pieces 0.2mm layer, 2 walls, 5% infill

The designer has replied

@3DJPDESIGNS

omg I love it 😍 thanks for sharing

@Fooblinator

Love this design. Only issue is the size of the neck doesn't seem to fit any of the rolls I have. I live in the US. Maybe they have a different size roll than in the EU or other places. I found out too late, and had to remove the glued-on neck as best I could, so I wouldn't have to re-print the head. Did well enough. I re-designed the neck to be smaller diameter and a bit longer. Printing now.

The designer has replied

@3DJPDESIGNS

yeah Ive had this problem with the US people , could I kindly ask what diameter you have re modelled it , Kinda wanna update the model for the US people

@Fooblinator

I used 38mm but it ended up being a bit loose. you could probably be safe with 40 or maybe even 42. I was okay with it loose a bit because I made the neck longer and I guess friction and gravity holds it in place.

@3DJPDESIGNS

Replying to @Fooblinator :

Yeah I might make one thats longer , I made it really short for less plastic waste xD