This is an original piece,.. not something downloaded off google or found anywhere else.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 1.6
PLA PolyTerra Army Dark Green Transmission Distance: 1.8
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Blue Gray Transmission Distance: 2.9
PLA BambuLab Matte Grass Green Transmission Distance: 2
PLA BambuLab Matte Mandarin Orange Transmission Distance: 2.6
PLA BambuLab Matte Ivory White Transmission Distance: 3.2

Swap Instructions:
Start with Charcoal
At layer #6 (0.56mm) swap to Army Dark Green
At layer #7 (0.64mm) swap to Dark Blue
At layer #10 (0.88mm) swap to Brown
At layer #11 (0.96mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Grass Green
At layer #13 (1.12mm) swap to Mandarin Orange
At layer #20 (1.68mm) swap to Ivory White for the rest.