enricoRE

cover

IMG_3349_f45d00d2-316b-48f3-93aa-0a8739668480.jpg

plate_1.png

IMG_3348_8031d574-f1d9-440d-a72b-828d508b7c6f.webp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: &nbsp;&nbsp;&nbsp;&nbsp;Start with Black &nbsp;&nbsp;&nbsp;&nbsp;At layer #9 (0.8mm) swap to Red &nbsp;&nbsp;&nbsp;&nbsp;At layer #13 (1.12mm) swap to Orange &nbsp;&nbsp;&nbsp;&nbsp;At layer #20 (1.68mm) swap to Yellow for the rest. &nbsp;Don't scale Z height

0.08mm layer, 1 walls, 100% infill

AmonAganon

PHOTO-2024-04-13-15-06-39 4_9ad7d9f6-34b1-44fd-9e0e-e74a5ca989a9.webp

PHOTO-2024-04-13-15-06-39_381d5856-f915-4fbf-be5d-75b935701102.webp

Same Profile as Designer, just added white for the last 2 layers to highlight the lightning, also used blue and purple instead of red and orange

5 colors, 0.08mm layer, 2 walls, 100% infill

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #20 (1.68mm) swap to Yellow for the rest. Don&#39;t scale Z height

Thor HueForge

ASIA

Print Profile(2)

Description

Comment & Rating (8)

License

Related Models