This 3D printable model seamlessly blends functionality and aesthetics, creating a unique lighting solution. Here are the essential details and materials required to construct this lamp:

Design:

• The lamp takes inspiration from a picture frame, resulting in a customizable and eye-catching lighting fixture.
• Whether you choose to laser-engrave the design onto acrylic or 3D print it, the lamp’s form resembles a classic picture frame.

Template:

• If you opt for laser engraving, ensure that the acrylic sheet is 100mm wide and 3mm thick.
• The height is flexible and doesn’t significantly impact the design.
• For 3D printing, use a generic Lithophane Maker (such as Flat Lithophane Maker).
• Recommended settings for the Lithophane Maker:
  • Width: 100mm
  • Options: No Border
  • Maximum Thickness: 3.0mm
• The bottom 10mm of the image should be predominantly or completely black, as this part will be concealed within the holder.

Materials Needed:

• SP110E Controller: Essential for controlling the LED strip from your phone.
  • SP110E Bluetooth Pixel Controller on Amazon/Aliexpress
• WS2812b LED-Strip: This strip serves as the vibrant light source. Consider using at least 60 LEDs/m, or even better, 144 LEDs/m for optimal illumination.
  • WS2812B LED Strip (length min. 100mm) on Amazon/Aliexpress
• 5V Power Supply: Any 5V power supply will suffice since we’re dealing with a small number of LEDs and not a lot of current is needed.
  • Consider using a USB to 5V (5.5/2.1mm) cable for convenience. You can find them on Amazon/Aliexpress

Assembly:

• No glue is necessary for assembly. Everything is press fit.
• For the SP110E controller, remove its casing to ensure it fits into the 3D printed parts.
• Refer to the explosion view of the entire assembly for guidance.

Enjoy creating your Picture Frame LED-Strip Lamp! 🌟🖼️