Christmas Ornament Candy Dish by EmbraceNext

EmbraceNext

Household>Festivities

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Regular print, 0.2mm layer, 2 walls, 15% infill

4.2 h

2 plates

4.8(37)

A1 MINI STANDARD BAMBULAB PROFILE 0.2mm layer, 2 walls, 15% infill

4.8 h

2 plates

5.0(5)

0.2mm layer, 2 walls, 15% infill

5.3 h

2 plates

4.5(2)

Boost

120

196

263

776

Released

Description

I was asked to design a Christmas ornament candy dish. This is what I came up with. It came out way better than I ever thought it would have. It prints very well even without supports!

I am even filling them with candy canes and other candies to give out as gifts and people love them.

Print Settings:

ORNAMENT - .8mm nozzle at .4mm layer height (this works great with .4mm nozzle and .2mm layer height but takes MUCH longer)
CROWN, CLIP and HOOK - .4mm nozzle at .2mm layer height
15% Infill
Prints great with PLA and PETG
No supports needed

Assemble:

Put the crown on first
Squeeze the clip together and put it through the holes of the crown.
Then snap the small part of the hook onto the clip thats in the crown.

Tips:

Here is a link to a video on how to put the clip in the crown. https://1drv.ms/v/s!AuVsbZlU2wLMg7d7vGVq-2VpQSZ_vA
If the clip breaks, then print it last and take it right off the print bed as soon as it finishes and squeeze it or you can use a heat gun.

Thank you to @Dadof6 for this video showing them being printed: https://www.instagram.com/p/CXKngN9FMS8/

Comment & Rating (50)

@d.doro

Print Profile

A1 MINI STANDARD BAMBULAB PROFILE 0.2mm layer, 2 walls, 15% infill

love this so much! such a great item! if I could note one item for future improvement it would be that both items I printed from this design have the same vertical gaps in printing (2). I only see it because I’m looking, none of my guests have noticed. neither of these gaps would keep me from using this, it is just awesome!!

The designer has replied

@Infinity3DPrint

that’s called a seam it’s completely normal for 3-D printing . look up how to hid it or make it less noticeable

@Infinity3DPrint

Replying to @Infinity3DPrint :

*hide

@d.doro

I was attempting to help you with your design. The intent here is to help each other, please don’t expect that I am an idiot. if I had an issue with a print such as a noticeable and measurable lack of filament where filament would normally be expected to be, I would want to know so I could look for remedies. Perhaps look at the pictures again, the “seam” you refer to is rather deep. I was able to get a better picture of it tonight. Best of luck!

@Infinity3DPrint

Print Profile

Regular print, 0.2mm layer, 2 walls, 15% infill

great print

@geekforlife

Print Profile

Regular print, 0.2mm layer, 2 walls, 15% infill

I enlarged it but changed nothing else, Love this print

@Svsalgado

Print Profile

Regular print, 0.2mm layer, 2 walls, 15% infill

good, easy. be carefull with silk filaments.

@d.doro

Print Profile

Regular print, 0.2mm layer, 2 walls, 15% infill

(Edited)

@Mandy65

Print Profile

Regular print, 0.2mm layer, 2 walls, 15% infill

liked the file so much I made two

@AndreoBTW

Print Profile

Regular print, 0.2mm layer, 2 walls, 15% infill

I love it!! really thank you for your work

@Adventures5

Print Profile

Regular print, 0.2mm layer, 2 walls, 15% infill

Very nice model. Printed flawlessly

@online585

Print Profile

Regular print, 0.2mm layer, 2 walls, 15% infill

Printed on Bambu A1 Mini. Made 7 of them in different colors and sizes. All printed great except the one I tried to do with the .02 nozzle on the finest setting. Clogged up the nozzle and haven’t been able to clean it out.