Hueforge of Batman - Dark Knight

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Esun Black Transmission Distance: 0.6
PLA+ Esun Grey Transmission Distance: 2
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Esun White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm), swap to Grey
At layer #22 (1.84mm), swap to Silver
At layer #35 (2.88mm), swap to White for the rest.

***WARNING***

If you scale the model, DO NOT SCALE THE Z-HEIGHT, or it will ruin the print

Z-Height must be the same as the original