I spent a good deal of time tuning this filament to print the master sword blade. Using these values I was able to construct the blade with the original tight tolerances with all friction fit, no sanding, and no glue.
Filament Profile Instructions:
Download the filament profile zip file
Open either Bambu Studio or Orca Slicer
Import the filament bundle zip file. (File → Import → Import Config…) and select the Filament Profile Zip file
If the import dialog says only one profile was imported, repeat step 2.
When it asks to confirm overwriting the profile of the same name, choose yes.
When successful 2 profiles should have been imported.
3MF Instructions:
Download the Raw 3MF file corresponding to BBS or Orca and open it
On the left you should see the filament profile
If you press the edit icon to the right, in the next dialog press the save icon and you can choose to save it as a User Preset
I'm learning and having fun with this. Feedback letting me know how your print went would be greatly appreciated.
If you're feeling generous and like what you see, Send me a tip.