Classic 2.5

cover

Blood_On_Monitor_CoverText_Framed.jpg

Blood_2Col_Plate_of_4.jpg

Blood_Keyboard_Text.jpg

Blood_4Colors_Text.jpg

Blood_One_Color_Text.webp

Blood_On_Bambu_Cut2.webp

Blood_On_Monitor_CoverText.webp

plate_1.png

One Color 0.08mm layer, 2 walls, 100% infill

Blood_On_Monitor_Close_Wide_Framed.webp

I printed on X1C, golden PEI-PlateFilaments I used: Bambu Matte PLA Dark Red and Bambu PLA Tough WhiteCombine them and Post a Picture, please!

Two Colors AMS-ready 0.08mm layer, 2 walls, 100% infill

Blood_Connectors15.webp

plate_1.webp

These are the connectors for the Blood Effect in Profile 1 and 2.I tried them, they work well! Scaled Up to 105%, better Fit now!A tiny bit of glue makes it permanent.In most cases I prefer to just stick them on with painter`s tape.If it`s a tough print for you, try 50 percent speed or even a little brim.

Connectors Only! 0.08mm layer, 2 walls, 100% infill

Blood_Prof4_small.webp

One Color Half-Sized Plate of Eight 0.08mm layer, 2 walls, 100% infill

Blood_Hanger_Shelf.webp

&nbsp;Use these to connect the bigger Blood-Drips if you like.A tiny bit of glue makes it permanent.These are meant for Profile 1 and 2. Scaled Up to 105% for better Fit!The longer one is useful for raining blood down your Shelves.Just fold and put some Weight on the long Part.The small rounded one is if you like to hang/pin your Blood anywhere.

One Hanger-Connector, one Shelf-Connector 0.08mm layer, 2 walls, 100% infill

Blood_4Colors.webp

If you want a slightly more realistic look and have an AMS loaded with the four Colors shown in the Profile, try this.I recommend printing this plate of one piece for comparison.You can then decide for yourself, the difference isn`t that big but I would definitely choose this one.After testing you can easily clone to as many pieces as you like.

4Colors One Piece Slightly more realistic 0.08mm layer, 2 walls, 100% infill

Simple and fast Prints!One Color if you want it quick and easy!Multicolor if you prefer a slightly more realistic Look!&nbsp;Two Sizes for all your Needs. Both Sizes can be combined to even several Meters of Blooddripping in no time.&nbsp;Plus: They will combine endlessly, make your bloody Mess as long/wide as you choose.&nbsp;

Printable BLOOD EFFECT

Global

Print Profile(6)

Description

Comment & Rating (0)

License

Related Models

Extendo Grabber! 3D Printable and Customizable!

Chainmail - 3D Printable Fabric

Bag Tpu Printable

Gear Soccer - Fully 3d printable pinball soccer