Magic Water tap

for Makerworld

Magic tap, created and adapted for Makerworld and Bambulab.
Print profiles are divided by object or all parts together.
The profile with 3 plates requires, for those who want to print the tube, changing the settings in "vase mode" for plate 3.
If you download one print profile at a time, the settings are already correct.
For those who want to color the tray with the Makerworld logo, the printing time is approximately 13 hours, while those who use a single color for the tray, the printing time is reduced to approximately 4 hours.

Required add-ons:

-5v immersion pump: https://amzn.eu/d/2D3mdmc

-usb cable: https://amzn.eu/d/c17g8PT

Assembly:

Insert the tube (previously printed in transparent PETG or if you have one with an external diameter of 8mm and an internal diameter of 7mm it is fine) into the tray, no glue is needed, it fits perfectly

Insert the pump into the printed hole and glue it with hot glue or superglue to the bracket as in the photo

Insert the pump cable into the appropriate hole and secure the hole with hot glue or gel glue to prevent water from flowing out. Then solder the USB cable

Remove the supports from the tap and with cutters, remove the burrs of the supports fixed to the model

Glue the flow regulator to the tube with hot glue or superglue

ENJOY!