Spider Catcher - Insect Trap Stick

Copyright Claim

Spider Catcher - Insect Trap Stick

Boost
1327
1994
205
GIF

Print Profile(3)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
7.7 h
4 plates
4.9(95)

A1mini - 0.2mm layer, 3 walls, 15% infill
A1mini - 0.2mm layer, 3 walls, 15% infill
Designer
7 h
3 plates
4.9(19)

0.2mm layer, 3 walls, 15% infill
0.2mm layer, 3 walls, 15% infill
8.7 h
4 plates
5.0(3)

Boost
1327
1994
205
64
1.6 k
712
Released

Description

Arachnophobia?

 

Spider-Catcher is a must-have for anyone uncomfortable with creepy crawlies, as it effectively captures them from floors, walls, or ceilings, allowing for quick and safe release outdoors.

An extension option (for unlimited size) is also available - because size does matter. ;)

I recommend printing the pyramid part in transparent PETG, of course you can print it in PLA, too.


Usage:

Place the Spider-Catch model over the spider and slide the flap on the underside to safely capture the spider.

Transport the spider to a desired location and release it there by simply rotating the rod, which opens the flap, allowing for touch-free release.

Just show me your Spider Catcher, I would be very happy to see it!

___

 

Spinnenangst?

Spider-Catcher ist ein Muss für jeden, der sich bei Krabbeltieren unwohl fühlt, da es sie effektiv von Böden, Wänden oder Decken einfängt und eine schnelle und sichere Freisetzung im Freien ermöglicht.

Eine Erweiterungsoption (für unbegrenzte Größe) ist ebenfalls verfügbar - denn Größe ist wichtig. ;)

Ich empfehle, den Pyramiden Teil in transparentem PETG zu drucken, aber es geht natürlich auch in PLA.

 

Anwendung:

Platziere den Spider-Catcher über der Spinne und schiebe die Klappe auf der Unterseite zu, um die Spinne sicher einzufangen.

Transportiere die Spinne an einen gewünschten Ort und setze sie dort durch eine einfache Drehbewegung der Stange, welche die Klappe öffnet, berührungslos frei.

Zeigt mir eure Spider Catcher, würde mich sehr darüber freuen!

Comment & Rating (205)

Please fill in your opinion
(0/5000)

I sure hope this print hurry's up because there's a giant spider on the wall next to my printer and I'd like to not smash it.
The designer has replied
20
Reply
I am so exited to see the catcher when he has finished printing 😍
1
Reply
Thats spooky.... I hate spiders. I mean they are cool, but I had a.... encounter with a big one at night and have never been the same since lol. I think I might have to give this print a go. just please for the love of god don't rotate the rod early by mistake!
2
Reply
Replying to @JupiCroco :
If arachnophobia is so severe, I would recommend securely sealing the threads as a precaution. Looking forward to seeing your print; I hope you'll share it with us. 😍
0
Reply
Before I will give this a bad rating I think it’s better to ask. The Grip (with mounting hole) and the extension do not fit together. printed both in PLA with the profile provided by the designer. am I doing something wrong ? can anyone help ? provided some pictures of the threads just for reference if this helps. thanks :) edit: I just finished printing the catcher and sadly It doesn’t fit either so I think it has to be the grip (with mount hole) that is causing the problem
(Edited)
The designer has replied
4
Reply
Thank you very much for your comment! After reviewing the matter, I must agree with you - there was indeed an issue with the thread on the "grip with hole," which has now been fixed thanks to your comment! Please accept my apologies for any inconvenience caused.
(Edited)
12
Reply
Replying to @WingArt :
thank you so much for the fast response and the fix! hope not too many people printed the faulty version. I will reprint it now and give a rating afterwards :)
3
Reply
Replying to @Tarik77 :
I sincerely hope that not too many people have printed the old version. I understand how frustrating it can be to discard a print, and it deeply pains me to know that my mistake has resulted in misprints. I would greatly appreciate any feedback and photos of successful prints! Also, thank you for waiting with the rating; I truly appreciate it!
(Edited)
5
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
works great! the designer listens to feedback and fixed my problem in less than 24h
The designer has replied
4
Reply
Thanx for rating and comment! Looks great in black!
(Edited)
1
Reply
Replying to @WingArt :
small update: I‘ve used the catcher twice now and it works like a charm! both times the spiders were removed safely. Not sure how but my wife managed to break off the handles - more specific the threaded part (see pictures) maybe you can have a look into making it a little more sturdy. Thank you!
0
Reply
Replying to @Tarik77 :
Thank you very much for the feedback and the pictures. I'm very sorry to see that the thread is broken. It's already completely filled, as can also be seen in the photos. One possible improvement could be to print the handle with a stronger material such as PAHT-CF.
(Edited)
1
Reply
works great
The designer has replied
1
Reply
Amazing color! What Filament did you use for the grip?
0
Reply
pla Matt White bambu and pla metal bambu thanks
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
nice print. works great. thank you
The designer has replied
2
Reply
thanx for comment/rating and the picture!
0
Reply
I love spiders but hate when they're on the ceiling! I did have to break off some of the threading to get it to go into the handle but it works like a dream! Thank you so much!
The designer has replied
1
Reply
Thank you very much for your comment! After reviewing the matter, I must agree with you - there was indeed an issue with the thread on the "grip with hole," which has now been fixed! Please accept my apologies for any inconvenience caused.
(Edited)
0
Reply
Thank you so much! I plan on making one for every room (my apartment gets a lot of spiders being in such a wooded area).
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
works
The designer has replied
1
Reply
Very nice print!
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Fantastic model, very well-designed and works great! I made this for my son-in-law, he's a baby when it comes to spiders, LOL. THX for the work and sharing! Definitely a boost here.
The designer has replied
1
Reply
Thank you very much for your comment & boost! 🙏
(Edited)
1
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Works and prints really nice! I haven't had chance to use it in action, but the overall function seems to be perfect!
The designer has replied
1
Reply
looks great with the red handle! 😍
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
mixed formfutura ePETG & Bambu basic PLA. 👍🏼
The designer has replied
1
Reply
very nice combination! 👍
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.