Logic connect 4

3Dprint-K81
Toys & Games>Board Games
Copyright Claim

Logic connect 4

3Dprint-K81
Boost
173
279
57
GIF
GIF

Print Profile(2)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
4.4 h
3 plates
4.8(20)
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
2.3 h
1 plate
5.0(3)
Open in Bambu Studio
Boost
173
279
57
4
263
107
Released

Description

Try to get four marbles of your colour in a horizontal, vertical or diagonal row on the shifting game board.

 

 

 

But watch out! To finish your turn, you must press the central button, which will make all marbles shift one position on game board.

 

Stay focused as all marbles change position on every turn!

 

Moreover, you can also disrupt your opponent's strategy by moving one of their marbles on your turn.

 

Insert a spring (you can take it from a normal writing pen, see photo) or if you want you can buy one on Amazon (LINK):

 

 

QUARKZMAN Compressione Molla, 5pz 304 Acciaio Inossidabile, 6mm OD, 0.6mm Filo Dimensione, 15mm Libero Lunghezza, Argento Tono : Amazon.it: Commercio, Industria e Scienza

Have fun and good luck!!!

 

Enjoy print and I look forward to your rating and feedback…thanks!

connect
connect 4
logic chess
logic
logic game
orbit
track
game
games
toys
cool
easy
puzzle
logic puzzle
chess game

Comment & Rating (57)

Please fill in your opinion
(0/5000)
level
@toppsikrett
Print Profile
0.2mm layer, 2 walls, 15% infill
Very nice thank you
The designer has replied
2
Reply
level
@3DprintK81
THX ❤️❤️
0
Reply
level
@SmonstrDesign
Print Profile
0.2mm layer, 2 walls, 15% infill
nice game! sometimes the balls don't roll over properly. so you have to be attentive 🤖
The designer has replied
1
Reply
level
@3DprintK81
thx ❤️
0
Reply
level
@KaffineAddict
Print Profile
0.2mm layer, 2 walls, 15% infill
This came out really good. Simple print. Fun to play
The designer has replied
1
Reply
level
@3DprintK81
wonderful...you chose some nice colors, great choice 👍🏻
0
Reply
level
@ME3DPrint
Thank You. Connect 4 is a classic. Took me about 20 mins to clean up that white part! :-| My fingers are probably a bit big when pressing the button :)
The designer has replied
1
Reply
level
@3DprintK81
if you have problems pressing the central button you could also do it on the sides with two hands. I added a profile for the main table with supports that are easier to remove and modified the existing one (with normal supports). If you feel like it, you can rate my project with stars... I thank you if you can ❤️
0
Reply
level
@Croux83
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
level
@3DprintK81
thx ❤️
0
Reply
level
@Tokolozi
Print Profile
0.2mm layer, 2 walls, 15% infill
Everything but the lid in this profile works, take the top 4.5/5 apart from the new modified part profile. it also prints much faster due to the reduced supports! Thanks for considering modifying the print based on the feedback!
(Edited)
The designer has replied
1
Reply
level
@3DprintK81
I modified the main table by closing it and leaving only a simple support to be easily removed. In addition, the existing profile (the main table not filled) has been changed from the support type from shaft to normal (as I had printed it, evidently there was an error in loading the files... sorry)
(Edited)
1
Reply
level
@3DprintK81
If you can print it let me know yours... THX 👍🏻
(Edited)
1
Reply
level
@Tokolozi
Replying to @3DprintK81 :
I will be able to test this weekend!
(Edited)
1
Reply
level
@nopainnogame
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
level
@iluminari3d
Print Profile
0.2mm layer, 2 walls, 15% infill
I tried the old version and found the supports ineffective and difficult to remove. However, the creator modified the profile after my comment in a very fast and professional way. I haven't printed it yet but I don't feel like giving it fewer stars than I did, I trust in his prints. I'll keep you updated
The designer has replied
1
Reply
level
@3DprintK81
Thank you so much ❤️
0
Reply
level
@3DprintK81
could I see the final result? what color did you choose? 🤗
0
Reply
level
@MarsGuy57
Boosted
awsome!
The designer has replied
1
Reply
level
@3DprintK81
THX ❤️
0
Reply
level
@user_1703786288
Please, can anyone help me how to download the version with supports?
The designer has replied
1
Reply
level
@3DprintK81
I do not understand what you mean? if you are not going to print with Bambulab you have to download the raw file and generate the gcode with your slicer (you can add the supports you prefer, speed, layer height etc.) otherwise if you have to print with a Bambulab, you can easily do it with one of the two profiles : what you prefer
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Logic Puzzles

Logic Puzzles

Froggydog10
0
5
7
4 wins / connect four (4 Gewinnt) Game

4 wins / connect four (4 Gewinnt) Game

PrintWorks
0
10
12
A1 mini 4 filament feed kit (with connectors)(MMS)

A1 mini 4 filament feed kit (with connectors)(MMS)

Rafał
0
29
11
Skadis 4 Corner Connector

Skadis 4 Corner Connector

ElleDee
0
57
57
PrivacyTermsGuidelinesFAQCookie PolicyCookie Settings
© 2024 MakerWorld