This is an adapter for the Creality K1/K1max printers to use a BLTouch.

It is secured to the toolhead with 2 x M2x12 screws and nuts.

Hint:

• Insert the BLTouch screws into the adapter before securing the adapter to the toolhead with the M2 nuts.
• Limit the maximum Y coordinate in “printer.cfg” to prevent the BLTouch hitting the back Z axis screw mount .
  [stepper_y]
  …
  position_max:
• print oriented as shown in the picture (2nd one), no support needed

These are the settings I use for the BLTouch in the “printer.cfg” file for my K1 Max:

[bltouch]

sensor_pin: ^nozzle_mcu: PA9

control_pin: nozzle_mcu: PA8

pin_move_time: 0.500

x_offset: 0.0

y_offset: 26

z_offset: 0.94

speed: 10

lift_speed: 10

probe_with_touch_mode: true

stow_on_each_sample: false

samples: 3

samples_result: average

samples_tolerance: 0.01

samples_tolerance_retries: 5

sample_retract_dist: 3

Cable configuration for connecting the BLTouch to the toolhead PCB:
(the pins are mirrored)