I found this stake to be too small for practical use in my potted plants. The design is nice, but it should be retooled to be larger in my humble opinion.

sidbarret007

0.2mm layer, 4 walls, 15% infill

Sure thing! It's always scalable but I'm working with a very small DIY indoor irrigation setup. I can produce a design that's more optimized for more regular applications.

MentaPrints

cover

plate_1.webp

irrigation stake_d55bf2b2-da56-4aed-be5f-d20e80ace99d.webp

plate_1.png

<ul><li>Wall loops - 4</li><li>infill - 15%</li><li>layer height - 0.2mm</li></ul><p>Not optimized for speed but I wanted it to be strong so the hook would hold up. So the increased wall count helped beef it up. If I were printing hundreds I'd bump the wall count down and print with a larger nozzle to cut print time.</p>

<p>There&#39;s not much to it. I needed a stake for a little potted plant to hold it&#39;s automated irrigation tube in place. I printed it and it was ready in under an hour. Doesn&#39;t need to be as strong as I printed it.</p>

Print Profile(1)

Description

Comment & Rating (2)

License

Related Models

Traditional Chinese Food Container / Planter

Guide for plants

Stakes for 1/4" irrigation line

Light Duty Plant Stake

Simple stake for potted plants