Printed on P1S with 0.2 MM nozzle. I don't recommend printing this with a 0.4 MM nozzle as it will not come out as detailed as intended. This model uses 5 colors, but with a single AMS you can add a pause at layer 23 and swap out the roll of filament in your AMS that you use for the boot colors with the filament you'd like to use for your outline. In my 5 color print profile this pause is already in the profile. In my case I switched out yellow with black. Just make sure to select the same AMS slot for both the boot color and the outline color and have them be the same materials.