Revised H-Pins for Gravitrax Pro Remixed by m_p_cameron

Remixed by

m_p_cameron

Toys & Games>Other Toys & Games

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

3 plates

Open in Bambu Studio

Boost

Released

Description

Update 1/4/2024

At the request of the Masked Marble, I've modified the original H-Pin so that it can be pushed horizontally rather than from above. Like their predecessors they pin together two adjacent Gravitrax Pro pillars. They can be used on the top or bottom of the pillar.

There are four variations: 24mm, 24.4mm, 24.5mm and 25mm.

In the 3Mf file there are three plates, Embossed, Plain and Reinforced. On the Reinforced plate I've provided the 24.4mm and 25.5mm versions.

Based on the feedback I've received the 24.4mm version appears to the best one.

I've eSun PLA+ in the photos as colour is quite close to Gravitrax's green and PLA+ wears a little better.

Comment & Rating (1)

@MaskedMarble

The 24.4 mm size is the perfect fit! And I tested with 12 of them creating a hexagon pattern around a central hub pillar, and a small clear platform fits perfectly with the 24.4mm size. The other sizes are too big or too small for the plate to fit perfectly.

No more