Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite Temp Green-Lime (Hot) Transmission Distance: 8
PLA PolyLite Natural Transmission Distance: 21

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Orange
At layer #15 (1.28mm) swap to Temp Green-Lime (Hot)
At layer #20 (1.68mm) swap to Natural for the rest.

** The Temp Green-Lime is a fairly random colour. You can still get great results swapping this for any dull colour, such as PolyLite beige, cream, light yellow, light green, or even a basic or bone white. I quite like the look of the original colours used, but my model has bone white and it worked out very well.

Scaling X and Y axis is fine, but do not scale the Z axis.