Cool HueForge print of an Alex Grey piece. His art seems to mesh great with HueForge. It took a little bit of tweaking to get the desired result, but here is the HueForge text file:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyLite Purple Transmission Distance: 0.5
PLA PolyLite Azure Blue Transmission Distance: 3
PLA PolyLite Pink Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Yellow Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Purple
At layer #5 (0.48mm) swap to Azure Blue
At layer #6 (0.56mm) swap to Pink
At layer #7 (0.64mm) swap to Red
At layer #9 (0.8mm) swap to Orange
At layer #14 (1.2mm) swap to Yellow for the rest.
The filaments used were not what is listed. Mainly used Sunlu filaments and just tried to color match with HueForge presets