I designed this cup holder to mount inside of my flip over ice shack for ice fishing.

The design works on a dove tail clip system in which the female clip is bolted to the surface you wish to mount the cup holder to using two M3 bolts. The cup holder body has the male clip attached to it. The male clip will easily slide and lock into the female clip, making this easy to install and remove for transport. The cup holder insert then slides right into the body and seats on the beveled flange This could be glued together or kept separate. It was designed in 3 pieces to avoid the need for supports.

The files are not oriented properly for printing but are just as I designed them. It should be fairly obvious of how to orient them on the build plate but if you are having trouble…

The female clip should stand vertically on the build plate

The cup holder body should lay face down on the build plate with the male clip standing vertically

and the cup holder insert should sit just as a cup would sit on your counter

This system was designed to free up space in my flip over ice shack, since space is limited when transporting gear from spot to spot. The sliding dove tail clip allows for accesories to be stored in transport and to be easily installed when setting up. This keeps the body of the sled clear for packing larger items such as heaters, electronics and minnow buckets.

I have also designed a few other accessories to work with this system.

Mountable Ice Rod Holder by blueguell | Download free STL model | Printables.com

Mountable Tray by blueguell | Download free STL model | Printables.com

I have included the fusion files for the clip system if anyone would like to remix and add more accessories to this system.