Glove dryer with fans
PETG with 12% infill was used
The fan has a dimension of 60x60x10 mm
Glove dryer is 157 mm high and has a diameter of 45 mm
Base is 40mm high and 250mm wide, the holes have a diameter of 15mm and are 20mm deep
The feet are 13mm in diameter and 125mm high
This is my first own design, if you have any comments or suggestions for improvement, please let me know!
_______________________________________________________________________________________________________________________
Handschuhtrockner mit Ventilatoren
Verwendet wurde PETG mit 12% infill
Der Ventilator hat ein Maß von 60x60x10 mm
Handschuhtrockner ist 157 mm hoch und hat einen Durchmesser von 45mm
Standfuß ist 40mm hoch und 250mm breit, die Löcher haben einen Durchmesser von 15mm und sind 20mm tief
Die Füße sind 13mm im Durchmesser und 125mm hoch
Das ist mein erstes eigenes Design, wenn Anmerkungen oder Verbesserungsvorschläge sind gerne her damit!