⚫ Karosa c734 ⚫

I would like to point out that this is one of the older models that I created a long time ago in Blender. It is possible that if I were modeling this year, I would probably have done some parts differently. I didn't want to publish this model here, but to delete it. I then showed it to someone and he was interested in it. Don't take this model as a perfect piece, because I'm not so happy with it. But I thought it would be a shame to delete it when someone might like it.

PS:

I am very happy but at the same time I am not completely satisfied. I had to leave out a lot of detail due to printing. In addition, as the model is large, it twists a lot on the printing plate. Please keep this in mind when evaluating the model. It's not exactly easy to get the printer to print it exactly. I recommend using 3D varnish on the mat. Which I personally didn't have, unfortunately. So I hope you like the model. I will release the model as soon as possible! Have a nice day.

MrHanjak 😉

Correct axis direction.

Don't make the mistake I did, and really focus on what you're doing!

Don't watch the Serial like me 🤣

➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Follow me on YouTube for more info about what you can look forward for. 
■ YouTube
➔ https://www.youtube.com/c/MrHanjak2017 

■ Video

🔳 INFO 🔳

■ Steel sheet 
➔ PEI

■ Nozzle
➔ 0.4

■ Layer height
➔ 0.15

■ Material 
➔ PLA

■ Infill        
➔ 15%

■ Circuit       
➔ 3

■ Supports      
➔ NO

■ Glue      
➔ YES

🔳Change of color + Brim🔳

Brim is individual - I can't tell you where yes and where not, it depends on how well your printer is calibrated. And how does it hold up on your steel sheet. So I'll leave it up to you. I don't need a brim almost anywhere.

➔ A1,A2 silverBLACK change color [3.95]

➔ B8 whiteRED(2x) [1.85]

➔D1,D3,D4,D5 whiteBLUEblack  [3.80] for blue       [4.25] for black

The picture is just a reference, do it for all the parts I listed, the heights are the same!

➔D2 whiteBLUE [3.80]

D6,D7 whiteBlackWhite  [2.15] for Black       [2.45] for White