I created this adaptor to go from a 20" Jet planer to a Rockler Dust Right quick change adaptor and it should work with Grizzly, Powermatic, and shop fox planers with a 5" Dust Port.
But this should work on any tool with a 5" port.
You will need a band clamp larger than 5" to make this adaptor stay on the planer or any tool with the same size port. I Use the following clamp.
This has been tested in PLA+ and PETG and has worked well with both, Keep in mind if your shop gets hot in the summer, Petg would be best.
STL and STEP files provided