Playing card box

Copyright Claim

Playing card box

Boost
25
51
9

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
40 min
1 plate
4.8(6)

Open in Bambu Studio
Boost
25
51
9
1
103
90
Released

Description

A boy for one deck of cards

Comment & Rating (9)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
Nice and easy print
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
nice
0
Reply
Boosted
Thanks :)
0
Reply
Nice Print! Easy to re-size also. I’ve made several already
0
Reply
@suprajake81 is right. I scaled the width to 107% to accommodate the playing cards I had. Other dimensions were fine. I think the recesses for the catches on the sides might be a little small. I can see that the sides are slightly bowed out when the lid is pressed down, indicating the recess isn't fully capturing the tab. It's probably in part due to my print quality (or lack there of). But a slightly larger recess would allow for some variations in printing.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Good print, but had to resize to 107% before I could get any cards in the box that then wouldn't be stuck in it. Also after a few times opening the box it doesn't want to stay closed.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more